Cablegland serie 2608 Ex d for armoured cable, valid for threads M63 – 2″ and Ø cable inner diam. of 37 to 43 mm and outer diam. 46 to 53 mm.

The cable glands 2601 are designed for cables for armature and the protection mode of increased security Ex d

Valid for threads M63  – 2″   y Øcable inner diam. 37 a 43 mm and outer diam 46 a 53 mm.

Technical characteristics

MANUFACTURING: Cable glands 260 series are built in electroplated brass, however, and on request, can also be manufactured in electro galvanized steel, stainless steel and aluminium. The elastomeric seals are black with an approximate hardness between 50 and 70 shores.

THREAD: The usual threaded is carried out in accordance with standard NPT ASA B. 2.1 ., and Metrics according to ISO 261, with average quality or higher according to ISO 965..

SEALING: For the fulfilment of protection degrees listed according to UNE 20324, DIN EN 40050 and EN 60529 and ensure the protection degree with the enclosure on which they are installed, the cable entries and accessories with cylindrical thread must have a seal.

EARTH GROUNDING: Electrical continuity on cable glands, made in metal, is sufficiently executed through the threaded part of the gland to the box.




IECEx LOM17.0003X


PCEC CE13.5025X

Manufactured according to guidelines

2014/34/UE (ATEX), TP TC 012/2011

Protection mode:

II2G Ex e IIC T6 Gb

II2G Ex d IIC T6 Gb

II2D Ex tb IIIC T85ºC Db

Area of use:

zona 1, 2, 21, 22

Degree of protection

según EN60529 IP65, IP66 (bajo pedido)

Temperature of use

Ta: -20ºC/+80ºC o -40ºC/+80ºC (bajo pedido)

Applicable Standards:

EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-31

IEC 60079-0, IEC 60079-1, IEC 60079-7,IEC 60079-31

GB3836.1, GB3836.2, GB3836.3, GB12476.1

ΓOCT 30852.0, ΓOCT 308.52.5, ΓOCT 14254-96



Rosca M63 Ø Int. 37-40 Ø Ext. 46-53260836A, Rosca M63 Ø Int. 40-43 Ø Ext. 46-53260836B, Rosca 2" Ø Int. 37-40 Ø Ext. 46-53260806A, Rosca 2" Ø Int. 40-43 Ø Ext. 46-53260806B

    Solicita tu oferta

    Skip to content