Cablegland 1601 Ex d are designed for cables unarmature valid for threads M20 – 1/2″ – 3/4″ y Ø outer 5 to 12 mm

The cable gland 1601 is designed for non-reinforced cables and the explosion-proof protection mode Ex d, increased safety Ex e and protection against dust ignition Ex d.

Valid for threads M20 – 1/2′ – 3/4  and Ø outer diam of 5 to  12 mm


REQUEST YOUR OFFER

Technical characteristics

MANUFACTURING: Cable glands series 160 are built in electroplated brass, however, and on request, can also be manufactured in electro galvanized steel, stainless steel and aluminium.The elastomeric seals are black with an approximate hardness between 50 and 70 shores.

THREAD: The usual threaded is carried out in accordance with standard NPT ASA B. 2.1 ., and Metrics according to ISO 261, with average quality or higher according to ISO 965.

SEALING: For the fulfilment of protection degrees listed according to UNE 20324, DIN EN 40050 and EN 60529 and ensure the protection degree with the enclosure on which they are installed, the cable entries and accessories with cylindrical thread must have a seal.

EARTH GROUNDING: Electrical continuity on cable glands, made in metal, is sufficiently executed through the threaded part of the gland to the box.

Standards:

Conformity: 94/9/CE (ATEX) Directive

CE Test Certificate  : LOM 02ATEX2015X

Applicable Standards: UNE- EN 60079-0, UNE-EN 60079-1, UNE-EN 60079-7 y UNE-EN 60079-31

Gas protection type: II 2 G Ex d II GB / Ex e II Gb

Dust protection type: II 2 D Ex tb IIIC Db

Protection degree: IP-68 According to standards UNE 20324, CEI 529 y EN 60529

WeightN/A
Tamaño

Rosca M20 Ø Ext. 5-8 160131A, Rosca M20 Ø Ext. 7-10 160131B, Rosca M20 Ø Ext. 9-12 160131C, Rosca 1/2"Ø Ext. 5-8 160101A, Rosca 1/2"Ø Ext. 7-10 160101B, Rosca 1/2"Ø Ext. 9-12 160101C, Rosca 3/4"Ø Ext. 5-8 160102A, Rosca 3/4"Ø Ext. 7-10 160102B, Rosca 3/4"Ø Ext. 9-12 160102C

Related products

    Solicita tu oferta

    Skip to content