Cablegland 1508 Ex e are designed for cables unarmature Valid for threads M80 – 3″ and Ø outer 60 a 70 mm.

The cable glands 1508 are designed for cables unarmature and the protection mode of increased security Ex e and Protection against ignition of dust Ex tb

Valid for threads M80 –  3″   y Ø outer diam of 60 to  70 mm 60 a 70 mm.



Technical characteristics

MATERIAL:Cable glands series 150 are made of electropassived brass. Under order requirements galvanized steel and stainless steel can also be used. The seals are elastomeric, black coloured, with an approximate hardness between 50 and 70 shores.

THREA:The usual threading is made in NPT according to standard ASA B.2.1. and Metric according to ISO 261 whether medium or high quality according to ISO 965.

WATERTIGHNESS: In order to fulfil the degrees of protection indicated in UNE 20324, DIN 40050 and EN 60529 and guarantee the degree of protection with the enclosure on which they are installed, the cable entries and accessories that have cylindrical thread must have a bed joint.

GROUND CONNECTION:Since the cable glands are manufactured in metal, the electrical continuity of the cable glands is achieved by means of the threading.

Standards:

Conformity: Directive 94/9/CE (ATEX)

CE test certificate: LOM 02ATEX2016X

Applicable Standards: UNE- EN 60079-0, UNE-EN 60079-7 and UNE-EN 60079-31

Gas protection type: II 2 G Ex e II Gb

Dust protection type: II 2 D Ex tb IIIC Db

Degree of protection: IP-68 as standard UNE 20324, CEI 529 and EN 60529

 

Tamaño

Rosca M80 Ø Ext. 60-63 150838A, Rosca M80 Ø Ext. 63-67 150838B, Rosca M80 Ø Ext. 67-60 150838C, Rosca 3" Ø Ext. 60-63 150808A, Rosca 3" Ø Ext. 63-67 150808B, Rosca 3" Ø Ext. 67-60 150808C

    Solicita tu oferta

    Skip to content